schc Q. Lampin Internet-Draft Orange Intended status: Informational 29 July 2026 Expires: 30 January 2027 SCHC Compression of VOICI Headers draft-lampin-schc-voici-compression-00 Abstract This document describes how to compress VOICI headers using SCHC rules at a lower stratum, demonstrating that VOICI provides explicit routing metadata that is transparently compressed to minimal on-wire size while preserving standardized dispatch semantics. It is intended as a reference for implementers deploying VOICI in SCHC- based networks and does not modify the VOICI specification itself. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 30 January 2027. Copyright Notice Copyright (c) 2026 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Lampin Expires 30 January 2027 [Page 1] Internet-Draft SCHC-VOICI-Profile July 2026 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. VOICI Header Layout . . . . . . . . . . . . . . . . . . . . . 3 4. SCHC Compression Rules for VOICI . . . . . . . . . . . . . . 4 4.1. Field Identifiers . . . . . . . . . . . . . . . . . . . . 4 4.2. Scenario A: Single Session (0-bit residue) with minimal VOICI header . . . . . . . . . . . . . . . . . . . . . . 5 4.3. Scenario B: Two Sessions (1-bit residue) . . . . . . . . 6 4.4. Extended Scenarios . . . . . . . . . . . . . . . . . . . 7 4.4.1. Multiple Sessions with Inline IDs . . . . . . . . . . 7 4.4.2. Sessions Beyond Inline Range . . . . . . . . . . . . 7 5. Concrete Example: Multi-Stratum Deployment . . . . . . . . . 8 5.1. Deployment Scenario . . . . . . . . . . . . . . . . . . . 8 5.1.1. SCHC Considerations . . . . . . . . . . . . . . . . . 8 5.2. SCHC processing at the 6LN . . . . . . . . . . . . . . . 9 5.3. SCHC Datagrams on the 6Lo Network . . . . . . . . . . . . 10 5.4. Transport over the Internet and processing at the Server . . . . . . . . . . . . . . . . . . . . . . . . . 11 5.5. Formats . . . . . . . . . . . . . . . . . . . . . . . . . 12 5.5.1. Upper Stratum Compression . . . . . . . . . . . . . . 12 5.5.2. Lower Stratum Compression . . . . . . . . . . . . . . 13 5.5.3. On-the-Wire Result . . . . . . . . . . . . . . . . . 14 6. Security Considerations . . . . . . . . . . . . . . . . . . . 15 7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 15 8. References . . . . . . . . . . . . . . . . . . . . . . . . . 15 8.1. Normative References . . . . . . . . . . . . . . . . . . 15 8.2. Informative References . . . . . . . . . . . . . . . . . 15 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 15 1. Introduction The VOICI link multiplexer [VOICI] provides a standardized transport header that carries session identification, content mechanism dispatch, and optional integrity protection with a minimal 1-byte header in the common case. When VOICI is carried over a link where SCHC [RFC8724] is also used for header compression, a lower SCHC stratum can compress the VOICI header itself. This document describes the SCHC rules that achieve this compression and demonstrates how VOICI provides explicit routing metadata that is transparently compressed, achieving minimal on-wire overhead while preserving standardized dispatch semantics. Lampin Expires 30 January 2027 [Page 2] Internet-Draft SCHC-VOICI-Profile July 2026 2. Terminology This documents follows the terminology described in [ARCH]. 3. VOICI Header Layout The VOICI header is defined in ~[VOICI]. For reference, the minimal header (no optional fields, inline Session ID) is a single byte: 0 1 2 3 4 5 6 7 bit +-+-+-+-+-+-+-+-+ |V|O|I|CI |S S S| +-+-+-+-+-+-+-+-+ Figure 1: VOICI minimal header The full header, including all optional fields, is: 0 1 2 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 bits +-+-+-+---+-----+ - - - - - - - - - - - - - - - + |V|O|I|CI | SSS | Session ID (long) | +-+-+-+---+-----+ - - - - - - - - - - - - - - - + +- - - - - - - - - - - - - - - -+ | CRC | (optional, I=1) +- - - - - - - - - - - - - - - -+ +- - - - - - - - - - - - - - - -+ (optional, O=1, | Original EtherType/Port | 2B for ET/UDP port, +- - - - - - - - - - - - - - - -+ 1B for IPv6 NH) Figure 2: VOICI header format The first byte is always present. The V-O-I flags (3 bits), CI field (2 bits), and SSS field (3 bits) form the mandatory header. The optional fields are present only when their corresponding flags are set: * *V* (1 bit): Header version. V=0 for the current specification. * *O* (1 bit): Original EtherType/Port flag. When set, the Original EtherType/Port field is present at the end of the header. * *I* (1 bit): Integrity flag. When set, a 2-byte CRC-16 field is present after the Session ID. * *CI* (2 bits): Content Identifier. CI=0 for unprocessed/raw, CI=1 for SCHC, CI=2 reserved, CI=3 for extended CI. Lampin Expires 30 January 2027 [Page 3] Internet-Draft SCHC-VOICI-Profile July 2026 * *SSS* (3 bits): Session ID prefix. Values 0-6 represent inline Session IDs; value 7 triggers a LEB128 extension in the following byte(s) with offset +7. * *Session ID (long)*: Variable-length LEB128-encoded Session ID, present only when SSS=7 (or when CI=3 for extended CI). * *CRC*: 16-bit CRC-16 integrity check, present only when I=1. * *Original EtherType/Port*: 1-2 bytes carrying the original EtherType, IPv6 Next Header, or UDP port number, present only when O=1. For the common case (V=0, O=0, I=0, CI=1 for SCHC, SSS=0 for Session 0), the byte value is: V=0, O=0, I=0, CI=01, SSS=000 => 0b00001000 => 0x08 For Session 1 (SSS=1), the byte value is 0x09. The full range of inline sessions (0-6) with CI=0b001 (SCHC Content) maps to bytes 0x08 through 0x0E. 4. SCHC Compression Rules for VOICI 4.1. Field Identifiers To write SCHC compression rules for the VOICI header, the following Field Identifiers (FIDs) are defined. These FIDs reference specific sub-fields of the VOICI header byte, as well as optional extension fields: Lampin Expires 30 January 2027 [Page 4] Internet-Draft SCHC-VOICI-Profile July 2026 +===============+=======================+===========+ | FID | Field | Size | +===============+=======================+===========+ | VOICI.V | Version | 1 bit | +---------------+-----------------------+-----------+ | VOICI.O | Original ET/Port flag | 1 bit | +---------------+-----------------------+-----------+ | VOICI.I | Integrity flag | 1 bit | +---------------+-----------------------+-----------+ | VOICI.CI | Content Identifier | 2 bits | +---------------+-----------------------+-----------+ | VOICI.SSS | Session ID prefix | 3 bits | +---------------+-----------------------+-----------+ | VOICI.SID | Session ID (LEB128) | variable | +---------------+-----------------------+-----------+ | VOICI.EXT_CI | Extended CI (LEB128) | variable | +---------------+-----------------------+-----------+ | VOICI.CRC | CRC-16 | 16 bits | +---------------+-----------------------+-----------+ | VOICI.ORIG_EP | Original ET/Port | 1-2 bytes | +---------------+-----------------------+-----------+ Table 1: VOICI header fields IDs for SCHC The per-field FIDs (VOICI.V through VOICI.SSS) enable SCHC compression rules that elide known sub-fields while preserving the Session ID identifier required for dispatch, original EtherType/NextHeader/Port and CRC when present. 4.2. Scenario A: Single Session (0-bit residue) with minimal VOICI header These examples illustrate a stratum scoped to the VOICI header alone. If the stratum spans multiple headers (e.g., [IPv6 | VOICI]), additional Field Descriptors are required for those headers (as shown in the concrete example). When only one session exists on the link, the minimal VOICI header has fully deterministic content, and per- field rules elide each sub-field individually. Lampin Expires 30 January 2027 [Page 5] Internet-Draft SCHC-VOICI-Profile July 2026 +===========+====+====+====+=======+=======+==========+ | FID | FL | FP | DI | TV | MO | CDA | +===========+====+====+====+=======+=======+==========+ | VOICI.V | 1 | 1 | Bi | 0b0 | equal | not-sent | +-----------+----+----+----+-------+-------+----------+ | VOICI.O | 1 | 1 | Bi | 0b0 | equal | not-sent | +-----------+----+----+----+-------+-------+----------+ | VOICI.I | 1 | 1 | Bi | 0b0 | equal | not-sent | +-----------+----+----+----+-------+-------+----------+ | VOICI.CI | 2 | 1 | Bi | 0b01 | equal | not-sent | +-----------+----+----+----+-------+-------+----------+ | VOICI.SSS | 3 | 1 | Bi | 0b000 | equal | not-sent | +-----------+----+----+----+-------+-------+----------+ Table 2: VOICI minimal header C/D rule, 1 session Residue: 0 bits (all fields elided) 4.3. Scenario B: Two Sessions (1-bit residue) When two sessions are multiplexed -- Session IDs 0 and 1 mapped to SSS values 0b000 and 0b001, the session identifier must be preserved. A 1-bit residue is achieved by eliding the known flag and CI bits while preserving SSS via MSB matching: +===========+====+====+====+======+========+==========+ | FID | FL | FP | DI | TV | MO | CDA | +===========+====+====+====+======+========+==========+ | VOICI.V | 1 | 1 | Bi | 0b0 | equal | not-sent | +-----------+----+----+----+------+--------+----------+ | VOICI.O | 1 | 1 | Bi | 0b0 | equal | not-sent | +-----------+----+----+----+------+--------+----------+ | VOICI.I | 1 | 1 | Bi | 0b0 | equal | not-sent | +-----------+----+----+----+------+--------+----------+ | VOICI.CI | 2 | 1 | Bi | 0b01 | equal | not-sent | +-----------+----+----+----+------+--------+----------+ | VOICI.SSS | 3 | 1 | Bi | 0b00 | MSB(2) | LSB | +-----------+----+----+----+------+--------+----------+ Table 3: VOICI minimal header C/D rule, 2 sessions * Session 0 (SSS=0b000) -> MSB(2) match -> residue: 0 * Session 1 (SSS=0b001) -> MSB(2) match -> residue: 1 Residue: 1 bit Lampin Expires 30 January 2027 [Page 6] Internet-Draft SCHC-VOICI-Profile July 2026 4.4. Extended Scenarios 4.4.1. Multiple Sessions with Inline IDs For up to 7 inline sessions (SSS values 0-6), the per-field approach with MO/CDAs Match-Mapping, Mapping-Sent or Ignore/Value-Sent on SSS can encode any number of sessions: * 2 sessions (SSS 0-1): MSB(2) match -> 1 bit residue * 3-4 sessions (SSS 0-3): MSB(1) match -> 2 bits residue * 5-7 sessions (SSS 0-6): Ignore/Value-Sent -> 3 bits residue 4.4.2. Sessions Beyond Inline Range For sessions with SSS=7 (LEB128 extension), the compressor must handle the variable-length Session ID field. A VOICI-aware compressor can preserve the LEB128-encoded Session ID as a variable- length residual field, producing a residue proportional to the Session ID magnitude: 12 bits for Session IDs 7-134, 20 bits for 135-65535 (4bits encoded length + 1 or 2 bytes of LEB128-encoded Session ID). +===========+=====+====+====+=======+========+============+ | FID | FL | FP | DI | TV | MO | CDA | +===========+=====+====+====+=======+========+============+ | VOICI.V | 1 | 1 | Bi | 0b0 | equal | not-sent | +-----------+-----+----+----+-------+--------+------------+ | VOICI.O | 1 | 1 | Bi | 0b0 | equal | not-sent | +-----------+-----+----+----+-------+--------+------------+ | VOICI.I | 1 | 1 | Bi | 0b0 | equal | not-sent | +-----------+-----+----+----+-------+--------+------------+ | VOICI.CI | 2 | 1 | Bi | 0b01 | equal | not-sent | +-----------+-----+----+----+-------+--------+------------+ | VOICI.SSS | 3 | 1 | Bi | 0b111 | equal | not-sent | +-----------+-----+----+----+-------+--------+------------+ | VOICI.SID | VAR | 1 | Bi | | ignore | value-sent | +-----------+-----+----+----+-------+--------+------------+ Table 4: VOICI minimal header C/D rule, Extended Session ID Residue: 12-20 bits Alternatively, specific rules for each sub-range can be derived setting the Field Length to 8 and 16 bits respectively to match Session IDs 7-134 and 135-65535 respectively, reducing the residue to 8 or 16 bits. Lampin Expires 30 January 2027 [Page 7] Internet-Draft SCHC-VOICI-Profile July 2026 5. Concrete Example: Multi-Stratum Deployment This section illustrates a deployment using multiple SCHC strata and VOICI for inter-stratum session multiplexing. It demonstrates how VOICI provides explicit dispatch metadata that is transparently compressed by a lower stratum, achieving minimal on-wire overhead. 5.1. Deployment Scenario The example deployment consists of a 6Lo mesh network with a 6LN (end device), a 6LR (mesh router), and a 6LBR (border router). Beyond the 6LBR, a Server hosting both CoAP and CoAPS resides on the Internet. The 6LN sends unencrypted CoAP traffic to the Server on UDP port 5683 and encrypted CoAPS traffic to the same Server on UDP port 5684. 5.1.1. SCHC Considerations The 6LN participates in 3 SCHC Sessions, Sess.0, Sess.1 and Sess.2. The 6LR and 6LBR participate in the SCHC Session Sess.0 only and the Server participates in Sessions Sess.1 and Sess.2. * Sess.1 and Sess.2 and corresponding Contexts are managed by a first actor, for instance a utility company that operates the Server. Both are executed on the same Endpoint that uses VOICI as the Dispatcher. * Sess.0 and corresponding Context is managed by the Network Operator of the 6Lo Network. Having a single Session, the corresponding Endpoint dispatches SCHC Data Units directly to the appropriate Instance. Lampin Expires 30 January 2027 [Page 8] Internet-Draft SCHC-VOICI-Profile July 2026 +-------+ +-------+ SCHC +--------+ | 6LN | SCHC Sess.0 | 6LBR | Sess.0 | Server | SCHC Sess.1 | | Sess.1 | | | | Sess.2 | | Sess.2 +----| |----------+ | | | | | | | | +---+---+ | +-------+ +--------+ | | | +---+---+ | | 6LR | SCHC +--------------+ | Sess.0 | | | | +-------+ 6Lo Network | Internet Figure 3: Example deployment scenario The deployment uses three SCHC strata: * *Upper Stratum 1*: Compresses [UDP | CoAP] in Session 1 * *Upper Stratum 2*: Compresses [UDP | CoAPS] in Session 2 * *Lower Stratum*: Compresses [IPv6 | VOICI] in Session 0 5.2. SCHC processing at the 6LN The following figure illustrates the 3 SCHC Strata and 3 Instances on the 6LN host. 1. Inst.1 compresses UDP/CoAP and produces the SCHC Data Unit SCHC Dat.1 Inst.2 compresses UDP/CoAPS and produces the SCHC Data Unit SCHC Dat.2 2. VOICI encapsulates SCHC Dat.1 with SSS:=0b000 or SCHC Dat.2 with SSS:=0b001. IPv6 Next Header is set to SCHC. 3. Inst.0 compresses IPv6/VOICI and produces SCHC Dat.0 VOICI.SSS MO/CDA set to msb/lsb and TV set to 0b00 Lampin Expires 30 January 2027 [Page 9] Internet-Draft SCHC-VOICI-Profile July 2026 +- +-----+-----+ -+ Sess.ID1 | |CoAP |CoAPS| | Sess.ID2 | +-----+-----+ | +---| | UDP | |---+ | +- +-----------+ -+ | | | | | | | +---+------+ +------+---+ |SCHC Dat.1| |SCHC Dat.2| +-----+----+ +----+-----+ | | +-----------+---------+ SSS:0b000 | SSS:0b001 +- +-----+------+ Sess.ID0 | | VOICI | | +------------+ +--| | IPv6 | | +- +------------+ | +----+-----+ |SCHC Dat.0| +----------+ Figure 4: VOICI header compressed at the 6LN 5.3. SCHC Datagrams on the 6Lo Network The following Figure illustrates how the Data Units are transported over the 6Lo network. 1. 6LN encapsulates the resulting PDU, that is the concatenation of SCHC Dat.0 and SCHC Dat.1/2, in the 802.15.4 payload with the SCHC Dispatch byte set and sends it to 6LR. 2. 6LR detects the SCHC dispatch byte and dispatches the frame to Inst.0. Inst.0 decompresses SCHC Dat.0, retrieves IPv6 header (and VOICI) and forwards to 6LBR. 3. 6LBR detects the SCHC dispatch byte and dispatches the frame to Inst.0. Inst.0 decompresses SCHC Dat.0, reconstructs IPv6 and VOICI headers. 6LBR forwards the IPv6 frame to its destination, outside of the 6Lo network. Lampin Expires 30 January 2027 [Page 10] Internet-Draft SCHC-VOICI-Profile July 2026 +------------+ Inst.0 +-|-> IPv6 -|-+ decompresses | +------------+ | | | +------------+ | +------------+ | +------------+ |SCHC Dat.1/2| | |SCHC Dat.1/2| | |SCHC Dat.1/2| +------------+ | +------------+ | +------------+ Inst.0 reconstructs |SCHC Dat.0 | +-|-SCHC Dat.0 | | |SCHC Dat.0--|---------+ +------------+ +------------+ | +------------+ | | 6Lo | | 6Lo | | | 6Lo | v +------------+ +------------+ | +------------+ +------------+ | 802.15.4 | | 802.15.4 | | | 802.15.4 | | VOICI | +-----+------+ +-------+----+ | +------------+ +------------+ | ^ | v ^ | IPv6 | | 6LN forwards | | 6LR forwards | +------------+ +-----to-6LR-----+ +----to-6LBR----+ 6LN 6LR 6LBR Figure 5: VOICI compressed on 6Lo Network 5.4. Transport over the Internet and processing at the Server The following Figure illustrates the SCHC datagrams transported over the Internet in IPv6 frames and how they are processed at the Server. 1. 6LBR forwards the IPv6 frame to the Server 2. The Server Endpoint dispatches the SCHC Dat. to Inst.1/2 based on VOICI.SSS value. SCHC Datagrams identified by VOICI.SSS = 0b000 are dispatched to Inst.1 which decompresses UDP and CoAP and those with VOICI.SSS= 0b001 are dispatched to Inst.2 which decompresses UDP and CoAPS. 3. The Original IPv6 Next Header value is restored to its original value (UDP,17) and the frame is handled by UDP which delivers the reconstructed UDP datagram to the application. 4. The CoAP(S) application server processes the message. Lampin Expires 30 January 2027 [Page 11] Internet-Draft SCHC-VOICI-Profile July 2026 +-------+ | CoAP | +-------+ | UDP | +-------+ ^ +------------+ +------------+ | SSS:0b000 |SCHC Dat.1/2| |SCHC Dat.1/2|---------+ +------------+ +------------+ | SSS:0b001 | VOICI | | VOICI | v +------------+ +------------+ +-------+ | IPv6 | | IPv6 | | CoAPS | +------------+ +------------+ +-------+ | Eth. | | Eth. | | UDP | +------+-----+ +------^-----+ +-------+ | | | 6LBR forwards | +----to-Server-----+ 6LBR Server Figure 6: IPv6 frame & VOICI dispatch at the Server 5.5. Formats Before any compression, the packet contains standard IPv6/UDP/CoAP with the following IPv6 addresses, fd00:1::4 for the 6LN and 2001:db8::13 for the Server. 5.5.1. Upper Stratum Compression Each upper stratum compresses its respective UDP/CoAP headers independently. After upper compression, VOICI encapsulates the upper SCHC datagram with a Session ID that routes it to the correct upper context at the receiver: * *Session 1*: VOICI byte = 0x08 (V=0, O=0, I=0, CI=01, *SSS=000*) * *Session 2*: VOICI byte = 0x09 (V=0, O=0, I=0, CI=01, *SSS=001*) The IPv6 Next Header field is set to indicate the presence of SCHC- compressed data (i.e., the SCHC IP Protocol Number). The intermediate packet handed to the lower stratum looks like: Lampin Expires 30 January 2027 [Page 12] Internet-Draft SCHC-VOICI-Profile July 2026 [CoAP Payload] [Upper SCHC Residue] [VOICI Header (SSS=0 or SSS=1)] [IPv6 Header (NH=SCHC)] Figure 7: Header layout of PDU compressed by Seesion 0 5.5.2. Lower Stratum Compression The lower stratum compresses the IPv6 and VOICI headers jointly using a single Rule. With only one lower stratum Rule, the Rule ID is zero-length; discrimination between the two upper sessions is carried in the 1-bit residue from the VOICI.SSS field (MSB(2) with LSB CDA). *Rule (Session 0)* Lampin Expires 30 January 2027 [Page 13] Internet-Draft SCHC-VOICI-Profile July 2026 +=============+=====+====+====+==============+========+===========+ | FID | FL | FP | DI | TV | MO | CDA | +=============+=====+====+====+==============+========+===========+ | IPv6 Ver | 4 | 1 | Bi | 6 | equal | not-sent | +-------------+-----+----+----+--------------+--------+-----------+ | IPv6 | 8 | 1 | Bi | 0 | equal | not-sent | | Traffic Cl. | | | | | | | +-------------+-----+----+----+--------------+--------+-----------+ | IPv6 Flow | 20 | 1 | Bi | 0 | equal | not-sent | | Label | | | | | | | +-------------+-----+----+----+--------------+--------+-----------+ | IPv6 Length | 16 | 1 | Bi | | ignore | compute-* | +-------------+-----+----+----+--------------+--------+-----------+ | IPv6 Next | 8 | 1 | Bi | | equal | not-sent | | Header | | | | | | | +-------------+-----+----+----+--------------+--------+-----------+ | IPv6 Hop | 8 | 1 | Bi | 64 | equal | not-sent | | Limit | | | | | | | +-------------+-----+----+----+--------------+--------+-----------+ | IPv6 Src | 128 | 1 | Bi | fd00:1::4 | equal | not-sent | | Addr | | | | | | | +-------------+-----+----+----+--------------+--------+-----------+ | IPv6 Dst | 128 | 1 | Bi | 2001:db8::13 | equal | not-sent | | Addr | | | | | | | +-------------+-----+----+----+--------------+--------+-----------+ | VOICI.V | 1 | 1 | Bi | 0b0 | equal | not-sent | +-------------+-----+----+----+--------------+--------+-----------+ | VOICI.O | 1 | 1 | Bi | 0b0 | equal | not-sent | +-------------+-----+----+----+--------------+--------+-----------+ | VOICI.I | 1 | 1 | Bi | 0b0 | equal | not-sent | +-------------+-----+----+----+--------------+--------+-----------+ | VOICI.CI | 2 | 1 | Bi | 0b01 | equal | not-sent | +-------------+-----+----+----+--------------+--------+-----------+ | VOICI.SSS | 3 | 1 | Bi | 0b00 | MSB(2) | LSB | +-------------+-----+----+----+--------------+--------+-----------+ Table 5: Session 0 C/D rule for IPv6/VOICI Residue: 1 bit 5.5.3. On-the-Wire Result The resulting 802.15.4 payload is: +-------------+------------------+---------------------------------+ |SCHC Dispatch|Lower SCHC Residue|Upper SCHC Residue| CoAP Payload | | (01000100) | (1bit) | | (raw) | +-------------+------------------+---------------------------------+ Lampin Expires 30 January 2027 [Page 14] Internet-Draft SCHC-VOICI-Profile July 2026 Figure 8: 802.15.4 payload on the 6Lo network 6. Security Considerations The SCHC compression of VOICI headers does not introduce new security considerations beyond those of the base VOICI specification ~[VOICI] and SCHC ~[RFC8724]. The compression rule described in this document preserves the integrity of the VOICI Header. 7. IANA Considerations This document has no IANA actions. The Field Identifiers defined herein are informational references for implementers writing SCHC compression rules for VOICI headers. 8. References 8.1. Normative References [RFC8724] Minaburo, A., Toutain, L., Gomez, C., Barthel, D., and JC. Zuniga, "SCHC: Generic Framework for Static Context Header Compression and Fragmentation", RFC 8724, DOI 10.17487/RFC8724, April 2020, . 8.2. Informative References [ARCH] Pelov, A., Thubert, P., Minaburo, A., Lampin, Q., and M. Dumay, "Static Context Header Compression (SCHC) Architecture", Work in Progress, Internet-Draft, draft- ietf-schc-architecture-06, 6 July 2026, . [VOICI] Lampin, Q., "VOICI", Work in Progress, Internet-Draft, draft-lampin-schc-voici-00, 28 July 2026, . Author's Address Quentin Lampin Orange Orange 3 Massifs - 22 Chemin du Vieux Chene 38240 Meylan France Email: quentin.lampin@orange.com Lampin Expires 30 January 2027 [Page 15]