Contents


 1. Compiling Dovecot From Sources

 2. Compiling Dovecot From Mercurial

 3. Compiling Dovecot with rpmbuild (Mandriva, RedHat, etc.)

 4. SSL/TLS Support

     1. Solaris and OpenSSL problems

 5. Notify method

     1. Linux

 6. Optional Configure Options

     1. SQL Driver Options

     2. Authentication Backend Options

 7. Dynamic Authentication Modules

 8. Dynamic IMAP and POP3 Modules

 9. Dynamic SQL drivers

Compiling Dovecot From Sources
==============================

For most people it is enough to do:

---%<-------------------------------------------------------------------------
./configure
make
sudo make install
---%<-------------------------------------------------------------------------

That installs Dovecot under the '/usr/local' directory. The configuration file
is in '/usr/local/etc/dovecot.conf'. Logging goes to syslog's mail facility by
default, which typically goes to '/var/log/mail.log' or something similar. If
you are in a hurry, you can then jump to <QuickConfiguration.txt>.

 If you have installed some libraries into locations which require special
include or library paths, you can pass them in the 'CPPFLAGS' and 'LDFLAGS'
environment variables. For example:

---%<-------------------------------------------------------------------------
CPPFLAGS="-I/opt/openssl/include" LDFLAGS="-L/opt/openssl/lib -ldl" ./configure
---%<-------------------------------------------------------------------------

You'll need to create a *dovecot* user (or change 'login_user' setting) that's
used by imap-login and pop3-login processes as kind of a "untrusted
Dovecot-specific nobody user". It should also have its own *dovecot* group. See
<UserIds.txt> for more information.

Compiling Dovecot From Mercurial
================================

If you got Dovecot from Mercurial, for instance with

---%<-------------------------------------------------------------------------
hg clone http://hg.dovecot.org/dovecot-1.2/
---%<-------------------------------------------------------------------------

you will first need to run './autogen.sh' to generate the 'configure' script
and some other files. This requires that you have the 'autoconf', 'automake',
'libtool', 'pkg-config' and 'gettext' packages installed. You also need to use
GNU make.

It is advisable to add '--enable-maintainer-mode' to the 'configure' script.
Thus:

---%<-------------------------------------------------------------------------
./autogen.sh
./configure --enable-maintainer-mode
make
sudo make install
---%<-------------------------------------------------------------------------

For later updates, you can use:

---%<-------------------------------------------------------------------------
hg pull
hg update
make
sudo make install
---%<-------------------------------------------------------------------------

Compiling Dovecot with rpmbuild (Mandriva, RedHat, etc.)
========================================================

Fetch the source rpm from ftp://ftp.surfnet.nl/
[ftp://ftp.surfnet.nl/vol/5/mandrakelinux/official/2007.0/SRPMS/contrib/release/]
or any other mirror. At the moment of this writing dovecot-10.rc26.src.rpm can
be found in the cooker subtree. If the current release is newer; updating the
source rpm is not difficult. Unpack the source rpm with 'rpm -ivh
dovecot-10.rc26.src.rpm' to a build environment (/usr/src/rpm...) Copy the
newer tarball from the dovecot site to the SOURCES directory of the build
environment. Change the dovecot.spec file in the SPECS directory to reflect the
new release and the new name of the tarball. The maintainer seems to work with
a bz2 tarball; a tar.gz tarball makes no difference Issue a rpmbuild -ba
dovecot.spec. The resulting rpm will be placed in RPMS/i586 Install with rpm or
urpmi.

---%<-------------------------------------------------------------------------
rpm -ivh dovecot-1.0.rc26.src.rpm
cd /usr/src/rpm
mv ~/downloads/dovecot-1.0.rc28.tar.gz ./SOURCES
cd SPECS
vi dovecot.spec
...edit release and tarball name. Change default options if needed...
rpmbuild -ba dovecot.spec
cd ../RPMS/i586
urpmi ./dovecot-1.0.rc28-1mdv2007.0.i586.rpm
---%<-------------------------------------------------------------------------

During this process missing prerequisites may be detected. Install them and
rerun the build process. The spec file also need updating for the new add-ons
(idxview and logview).

SSL/TLS Support
===============

Dovecot was initially built to support both OpenSSL and GNUTLS. GNUTLS has
however had some problems and nowadays it does not work any more. Patches to
fix it are welcome.

OpenSSL is used by default now, and it should be automatically detected. If it
is not, you are missing some header files or libraries, or they are just in a
non-standard path. Make sure you have the 'openssl-dev' or a similar package
installed, and if it is not in the standard location, set 'CPPFLAGS' and
'LDFLAGS' as shown in <the first section above.> [CompilingSource.txt]

By default the SSL certificate is read from '/etc/ssl/certs/dovecot.pem' and
the private key from '/etc/ssl/private/dovecot.pem'. The '/etc/ssl' directory
can be changed using the '--with-ssldir=DIR' configure option. Both can of
course be overridden from the configuration file.

Solaris and OpenSSL problems
----------------------------

Solaris 10 includes a bundled OpenSSL that does not function correctly with
Dovecot when attempting to use SSL/TLS with the default dovecot config. This is
because the default setting of ssl_cipher_list in 'dovecot.conf' is HIGH:!ALL;
due to import restrictions in some countries (now apparently relaxed) the high
level routines are part of the unbundled SUNWcry package and are not available
if you don't have this package installed. This confuses the client as dovecot
announces support for high level crypto and then cannot deliver. In any case,
to resolve this you can alternatively (in decreasing order of simplicity):

 1. Set 'ssl_cipher_list = MEDIUM:!LOW' in 'dovecot.conf'
 2. Find and install the missing SUNWcry package.
 3. Provide an alternate version of the openssl libraries that doesn't have the
    high grade routines removed for your protection (sigh). The bundled version
    of OpenSSL cannot be removed. Installing a newer OpenSSL from source or
    package (for instance, from http://sunfreeware.com/) will enable Dovecot to
    work correctly as long as you link against the new OpenSSL. Assuming you
    are building with the built-in ld, make and gcc, then your build should go
    something like this (notice the -R required by Sun's linker that sets the
    runtime linking path in the resulting programs so the OpenSSL libraries
    load from '/usr/local/ssl/lib'):

---%<-------------------------------------------------------------------------
PATH=$PATH:/usr/sfw/bin:/usr/ccs/bin
export PATH
mv /usr/lib/pkgconfig/openssl.pc /usr/lib/pkgconfig/openssl.pc.orig
CPPFLAGS=-I/usr/local/ssl/include \
 LDFLAGS='-L/usr/local/ssl/lib -R/usr/local/ssl/lib' \
 ./configure --with-ssl=openssl
make
make install
---%<-------------------------------------------------------------------------

Notify method
=============

Linux
-----

Note that current 'inotify' is in the Linux kernel since version 2.6.13 and it
is preferred over 'dnotify'. If your distribution does not have the required
'inotify' header file, you can get it from the inotify maintainer (this example
requires cURL [http://curl.haxx.se/]):

---%<-------------------------------------------------------------------------
mkdir -p /usr/local/include/sys
cd /usr/local/include/sys
curl ftp://ftp.kernel.org/pub/linux/kernel/people/rml/inotify/headers/inotify.h
-O
curl
ftp://ftp.kernel.org/pub/linux/kernel/people/rml/inotify/headers/inotify-syscalls.h
>> inotify.h
---%<-------------------------------------------------------------------------

/usr/local/include isn't in standard include lookup path, so you'll need to
specify that to configure:

---%<-------------------------------------------------------------------------
CPPFLAGS=-I/usr/local/include ./configure --with-notify=inotify
---%<-------------------------------------------------------------------------

Debian Etch ships 'sys/inotify.h' wrapped in the 'inotify-tools' package and
installs the header file into '/usr/include/inotifytools/'. To use the header
file use:

---%<-------------------------------------------------------------------------
if ! test -e /usr/include/sys/inotify.h; then
    aptitude install inotify-tools
    ln -sf /usr/include/inotifytools/inotify.h /usr/include/sys/inotify.h
fi
---%<-------------------------------------------------------------------------

Then pass 'CPPFLAGS' as in the example above:

---%<-------------------------------------------------------------------------
CPPFLAGS=-I/usr/include/inotifytools ./configure --with-notify=inotify
---%<-------------------------------------------------------------------------

Optional Configure Options
==========================

--help:
  gives a full list of available options

--help=short:
  just lists the options added by the particular package (= Dovecot)

Options are usually listed as '--with-something' or '--enable-something'. If
you want to disable them, do it as '--without-something' or
'--disable-something'. There are many default options that come from autoconf,
automake or libtool. They are explained elsewhere.

Here is a list of options that Dovecot adds. You should not usually have to
change these, but they are described here just for completeness:

--enable-ipv6:
  Enable IPv6 support. This is enabled by default if the system is detected to
  support it.

--enable-devel-checks:
  Enables some extra sanity checks. This is mainly useful for developers. It
  does quite a lot of unnecessary work but should catch some programming
  mistakes more quickly. (v1.1 and older called this --enable-debug)

--enable-asserts:
  Enable assertion checks, enabled by default. Disabling them may slightly save
  some CPU, but if there are bugs they can cause more problems since they are
  not detected as early.

--disable-largefile:
  Specifies if we use 32bit or 64bit file offsets in 32bit CPUs. 64bit is the
  default if the system supports it  (Linux and Solaris do). Dropping this to
  32bit may save some memory, but it prevents accessing any file larger than 2
  GB. (v1.0 called this --with-file-offset-size=32)

--with-mem-align=BYTES:
  Specifies memory alignment used for memory allocations. It is needed with
  many non-x86 systems and it should speed up x86 systems too. Default is 8, to
  make sure 64bit memory accessing works.

--with-ioloop=IOLOOP:
  Specifies what I/O loop method to use. Possibilities are 'select', 'poll',
  'epoll' and 'kqueue'. The default is to use the best method available on your
  system.

--with-notify=NOTIFY:
  Specifies what file system notification method to use. Possibilities are
  'dnotify', 'inotify' (both on Linux), 'kqueue' (FreeBSD) and 'none'. The
  default is to use the best method available on your system. See <Notify
  method> [CompilingSource.txt] above for more information.

--with-storages=FORMATS:
  Specifies what mailbox formats to support. Note: Independent of this option,
  the formats /raw/ and /shared/ will be always built.

--with-solr:
  Build with Solr full text search support

--with-zlib:
  Build with zlib compression support (default if detected)

--with-bzlib:
  Build with bzip2 compression support (default if detected)

SQL Driver Options
------------------

SQL drivers are typically used only for authentication, but they may be used as
a lib-dict backend too, which can be used by plugins for different purposes.

--with-sql-drivers:
  Build with specified SQL drivers. Defaults to all that were found with
  autodetection.

--with-pgsql:
  Build with PostgreSQL support (requires pgsql-devel, libpq-dev or similar
  package)

--with-mysql:
  Build with MySQL support (requires mysql-devel, libmysqlclient15-dev or
  similar package)

--with-sqlite:
  Build with SQLite3 driver support (requires sqlite-devel, libsqlite3-dev or
  similar package)

Authentication Backend Options
------------------------------

The basic backends are built if the system is detected to support them:

--with-passwd:
  Build with <passwd> [AuthDatabase.Passwd.txt] support (typically NSS /
  '/etc/passwd')

--with-passwd-file:
  Build with <passwd-like file> [AuthDatabase.Passwd.txt] support

--with-shadow:
  Build with <shadow> [PasswordDatabase.Shadow.txt] password support

--with-pam:
  Build with <PAM> [PasswordDatabase.PAM.txt] support

--with-nss:
  Build with <NSS> [UserDatabase.NSS.txt] support

--with-sia:
  Build with Tru64 SIA support

--with-checkpassword:
  Build with <checkpassword> [AuthDatabase.CheckPassword.txt] support

--with-bsdauth:
  Build with <BSD authentication> [PasswordDatabase.BSDAuth.txt] support (if
  supported by your OS)

--with-static-userdb:
  Build with <static userdb> [UserDatabase.Static.txt] support

--with-prefetch-userdb:
  Build with <prefetch userdb> [UserDatabase.Prefetch.txt] support

Some backends require extra libraries and are not necessarily wanted, so they
are built only if specifically enabled:

--with-sql:
  Build with generic SQL support (drivers are enabled separately)

--with-ldap:
  Build with LDAP support (requires openldap-devel, libldap2-dev or similar
  package)

--with-gssapi:
  Build with GSSAPI authentication support (requires krb5-devel, libkrb5-dev or
  similar package)

--with-vpopmail:
  Build with vpopmail support (requires vpopmail sources or a devel package)

Dynamic Authentication Modules
==============================

Dovecot can also dynamically load authentication modules from the
'$prefix/lib/dovecot/auth/' directory. Binary packages builders should use them
for authentication modules which require external libraries (e. g. LDAP and
vpopmail). There is no standard way to build them as modules currently, but
something like this should work:

---%<-------------------------------------------------------------------------
gcc -shared -fPIC -DHAVE_CONFIG_H -DUSERDB_LDAP -DPASSDB_LDAP \
-I../.. -I../lib -I../lib-settings \
db-ldap.c userdb-ldap.c passdb-ldap.c -o ldap.so -lldap
gcc -shared -fPIC -DHAVE_CONFIG_H -DUSERDB_VPOPMAIL -DPASSDB_VPOPMAIL \
-I../.. -I../lib userdb-vpopmail.c passdb-vpopmail.c -o vpopmail.so \
-lvpopmail
---%<-------------------------------------------------------------------------

Dynamic IMAP and POP3 Modules
=============================

The 'mail_plugins' setting lists all plugins that Dovecot is supposed to load
from the 'mail_plugin_dir' directory at program start. These plugins can do
anything they want. They are only expected to contain the '<plugin name>_init'
and '<plugin name>_deinit' functions which are called at startup and at exit.

The plugin filename is prefixed with a number which specifies the order in
which the plugins are loaded. This is important if one plugin depends on
another.

Dynamic SQL drivers
===================

The SQL drivers can be used by dovecot-auth, but also by lib-dict. lib-dict
then can be used by some plugins, for example enabling dict quota backend to
keep the quota information in SQL database.

You could place the SQL drivers into main plugin directory and create symlinks
for them into auth/, imap/, pop3/ and lda/.

---%<-------------------------------------------------------------------------
cd src/lib-sql
gcc -shared -fPIC -DHAVE_CONFIG_H -DBUILD_PGSQL \
-I../.. -I../lib -I../lib-settings -I/usr/include/postgresql \
driver-pgsql.c -o driver_pgsql.so -L/usr/lib/postgresql -lpq
gcc -shared -fPIC -DHAVE_CONFIG_H -DBUILD_MYSQL \
-I../.. -I../lib -I../lib-settings -I/usr/include/mysql \
driver-mysql.c -o driver_mysql.so -lmysqlclient
---%<-------------------------------------------------------------------------

(This file was created from the wiki on 2010-05-24 04:42)
